Pooduct hotline:+86-431-81785047
Welcome to Changchun Guanghua Microelectronics Equipment Engineering Center Co., Ltd!
Company name: changchun guanghua microelectronics equipment engineering center co., LTD
Address: Changchun city of jilin province high and new north district MingXi road 1759
Telephone: +86-431-81785047 Fax: +86-431-81785047
Email:ghgsjyb2004@163.com
All rights reserved: Changchun Guanghua Microelectronic Equipment Engineering Center Co., Ltd 吉ICP备案14005341号 Powerd by:www.300.cn
Laser Trimming System
Laser Trimming System
LTR Series laser trimming system is the key equipment in the production line of chip resistor.It relates to the technical fields of optics , precision mechanism , computer control, high speed &high precision measurement, etc. It use the high energy pulse laser to focus very small beam spot ( about several ten micro meters ) on the material of the chip resistor, which make the material heat up, melt and gasify. The beam spot scan a graph by dual-galvanometers and vary the conductive length and area of the chip resistor, which vary the resistor's value.
There are five series according to the application field: (1)LTR420D, thick film chip resistor;
(2)LTR420E, small size chip resistor(0201,01005);(3)LTR420F, low ohm chip resistor;
(4)LTR530, thin film chip resistor;(5)LTR-FC, functional circuits.
LTR Series laser trimming system is the honor product of the CCGH Company. It has been developed 20 years. With complete independent intellectual property rights and good market reputation. Equipments occupy the main domestic market and customers throughout the major Taiwan resistance manufactures and exported to Japan, Thailand, Philippines, Malaysia and other countries. The world's top five chip resistance manufactures are using CCGH's laser trimming system.
LASER |
Wavelength |
1.064μm (532nm,355nm Optional ) |
|
|
Power |
>6w @ 10kHz2w/532nm,1w/355nm) |
|
BEAM POSITION |
Expender |
2-8X |
|
|
Focus Length |
170mm(100 or 125 Optional) |
|
|
Spot Size |
30μm±10μm(10μm±2μm or 17μm±3μm Optional) |
|
|
Trim Area |
65mm×10mm |
|
|
Speed |
1~600mm/s |
|
VISION |
View Area |
4mm×3mm |
|
MEASURE |
(1)R Range:1Ω ~ 300M(2mΩ ~ 1Ω Optional) |
||
|
Accuracy |
Low |
±0.02%±(1%/R) ( 1Ω <R < 50Ω) |
|
|
Middle |
±0.02% |
|
|
High |
±0.02%±0.02%/MΩ(100KΩ <R < 10MΩ) |
|
(2)DC Voltage Measurement:0.1~32V(Optional) |
||
|
Accuracy |
Low |
±0.1%±5mV ( Volt <4V ) |
|
|
Middle |
±0.1%±2mV |
|
|
High |
±0.1%±5mV ( Volt > 16V ) |
|
(3)Guard Circuit:Drive Current,200mA(Optional) |
||
|
Measure Channel |
24 ~ 240(24 channels per board,1-10 boards) |
|
|
Prober Card |
2/4T--4Line |
|
Motion/
Mechanics |
(1)Y Linear Motor |
Range |
300mm |
|
|
Accuracy |
±10 μm |
|
|
Chuck |
Edge Position,Vacuum(Center Position Optional) |
|
(2)X Linear Motor (Optional) |
Range |
30、75、100mm |
|
|
Accuracy |
±10 μm |
|
(3)Z Optics |
Range |
<7mm(Manual) |
|
|
Resolution |
10μm |
FUNCTIONAL
CIRCUIT TRIM
(CUSTOM) |
Independently settings for every resistor in the circuit
For example, target resistance value, test channel, cut graph etc. |
||
COMPUTER AND
SOFTWARE |
Operating System |
XP Or WIN7 |
|
|
Statistics |
PASS,OPEN,HIGH Or LOW,Alarm |
|
|
Files |
Trim,System Control, PM, OEE,Data,Etc。 |
PRODUCTS